Key Principles Of Efficient Flat Roof Repair

I have learned from experience that finding a leak in a flat roof can be somewhat difficult and expensive.  In our home it took 3 different roofers to identify the point in our flat roof that a leak was coming from.  The reason why identifying leaks in flat roofs is difficult is that very often the point where the leak shows in the ceiling below can be quite different from the place at which the leak is occurring in the flat roof itself. 

The first places to look for leaks on a flat roof are flashing or junctions or seals of any kind.  Now, flashings are used at the point at which the roof joins non-roofing material such as brickwork.  For example above our kitchen extension we have a parapet wall at one edge of the roof and flashing goes from the roof to the parapet wall. 

As reported at flat roof company, a capable roofer will first examine these flashings to isolate gaps through which water could perhaps pass. Flashings are usually made of a metal material such as lead. 

It is also usually difficult to test for leaks on a flat roof in the way you would on other types of roofs. The reason is because it could take hours for water to trickle down to the ceiling from the moment you poured it on a suspect area on the roof. This means that in reality it's very hard to test and track multiple suspect places on the roof.  This is explained a bit more at the epdm roof web page.

The key to flat roof repair is to recognize in upfront the areas most likely to be vulnerable. The best test unfortunately is to carry out the work to close suspect gaps and then wait to see if the leak persists. Therefore flat roof repair depends very much on the professional skill of the roofer you hire.